Option A7-Year Graphene
Outstanding gloss, strong hydrophobics and durability measured in years rather than months. The go-to for daily drivers and family vehicles that need to stay easy to wash.

Lithgow NSW · Indoor install & cure
Accredited Magnum Ceramic Coating installation in a controlled indoor workshop — with the decontamination and paint correction that has to happen first.
Why the workshop matters
Ceramic coating in Lithgow is done indoors at our workshop for one reason: a coating needs still air, stable temperature and no moisture while it flashes and cures.
Dust landing on wet coating becomes part of the coating. Wind accelerates flash times and causes high spots. Rain within the cure window can ruin an install outright. In a closed garage with dedicated inspection lighting, none of that is a variable — which is why correction and coating work is always workshop-based, even for our Bathurst customers.

Standout is an accredited Magnum installer, which is the only way to get their Luminous X borophene coating installed.

The install
Vehicle and paint assessment under inspection lighting, including paint depth readings so we know exactly what we are working with.
Deep wash, iron fallout removal, tar removal and mechanical decontamination to strip the panel back to bare paint.
Machine polishing to remove swirls and defects. Whatever is left in the paint at this point is locked under the coating.
Panel wipe-down to remove polishing oils so the coating can bond directly to the clear coat.
Coating installed panel by panel in controlled conditions, levelled and inspected as it flashes.
Controlled cure in the workshop, then handover with maintenance guidance and a wash schedule.
Coating options
Both are quoted with the preparation your paint actually needs. A coating over uncorrected paint is a waste of money — we'll show you the difference before you decide.
Option AOutstanding gloss, strong hydrophobics and durability measured in years rather than months. The go-to for daily drivers and family vehicles that need to stay easy to wash.
Option BOur longest-term protection, for owners keeping a vehicle for the long haul or protecting a prestige, performance or enthusiast car.
Reviews
“Extremely happy with the results! I got a ceramic coating package and my car looks incredible the paint looks so fresh and they even got out some scratches! 10/10 recommend!!”
“Absolutely Amazing! I drove my brand new LC300 series from the dealer straight to Brayden for the ceramic coating. He had it done and it was ready for pick up the following day. Incredible results.”
“Brayden is professional and his attention to detail on the full interior & exterior detail on my G Wagon was top tier! I could not be happier with his service and recommend to anyone wanting to get their car detailed with some extra TLC!”
FAQ
A ceramic coating is a liquid polymer that chemically bonds to your clear coat and cures into a hard, transparent protective layer. Unlike a wax or a sealant that sits on the surface for a few weeks or months, a coating becomes a semi-permanent layer that resists chemicals, UV and contamination, and makes the paint dramatically easier to keep clean.
It depends on the product and how the car is looked after. Standout is an accredited Magnum installer, offering their graphene coating at up to seven years and their Luminous X borophene coating at ten. Those are the manufacturer's ratings, and they assume sensible maintenance — correct wash technique and periodic inspections. A coated car that's run through a spinning-brush car wash every fortnight will not see the full term.
No. This is the single biggest myth in the industry. A coating adds meaningful chemical and environmental resistance, and it helps against very fine marring, but it will not stop a shopping trolley, a key, or a dirty wash mitt dragged across the paint. What it does is make the surface much easier to clean, which in turn means far fewer wash-induced scratches over the life of the car.
Almost always, yes. New cars pick up defects in transport, in pre-delivery washing and on the dealer lot, and factory paint frequently arrives with sanding marks or light swirling already in it. Coating over that permanently seals it in. A single-stage correction before coating is standard on new vehicle packages.
Wash every two to four weeks using a pH-neutral shampoo and a two-bucket or touchless method, avoid automatic brush washes, and dry with a clean microfibre or filtered blower. Remove bird droppings and sap promptly rather than letting them sit. We provide a written maintenance guide at handover, and maintenance washes can be booked with us if you'd rather we handled it.
More in Lithgow

Ready when you are
Professional detailing, correction and protection from Standout Auto Detailing — workshop and mobile in Lithgow, mobile throughout Bathurst.